Esihlokweni esandulele esikhulume ngaso I-TuxClocker okuyithuluzi lokudlula ngokweqile amakhadi eNvidia kuLinux futhi nakulenye indatshana manje sekungukujika kwelinye ithuluzi lamakhadi evidiyo e-AMD.
Ithuluzi esizokhuluma ngalo namuhla yiWattmanGTK okuyi-interface ye-GTK yamakhadi wevidiyo we-AMD ngokweqile.
Mayelana neWattmanGTK
Kusuka kwimisebenzi etholakalayo, kungenzeka ukubuka isimo senkumbulo nezindlela zokusebenza (Isimo) ye-GPU, ilandelela izinguquko kudatha evela kuzinzwa ezihlanganisiwe kwi-GPU (izinga lokushisa, imvamisa ye-GPU, imvamisa yememori yevidiyo, isivinini sabalandeli).
I-WattmanGTK ayikwazi ukulawula ngqo imvamisa namandla kagesiIkhiqiza kuphela amapharamitha wesishayeli se-amdgpu, esidinga ukudluliswa lapho silayishwa kusetshenziswa i- «amdgpu.ppfeaturemask»(Isikripthi se-Shell esilungile singenziwa kokukhiphayo ukusebenzisa izilungiselelo).
Uhlelo futhi alusekeli ukuguqula amapharamitha wokusebenza we-cooler futhi alukwazi ukuqapha ngasikhathi sinye umsebenzi wama-GPU amaningi.
I-WattmanGTK ibhalwe ngePython futhi iyatholakala ngaphansi kwelayisense le-GPLv2.
Kubalulekile ukukusho lokho leli thuluzi lisebenza kuphela ngamakhadi evidiyo asebenzisa umshayeli we-AMDGPU, ngakho-ke akusizi kumakhadi amadala.
Elinye iphuzu elibalulekile ongalisho ukuthi iWattmanGTK inesibopho sokunikeza umsebenzisi imiyalo kanye nemingcele edingekayo ukuze umsebenzisi akufake ekulungiselelweni kwekhadi lakhe. Ngakho-ke lezi zenzo zibeka engcupheni yomsebenzisi futhi akuyena umdali wohlelo noma omunye umuntu obhekele ukusetshenziswa kwalolu hlelo lokusebenza, kuphela umsebenzisi wokugcina.
Ungayifaka kanjani iWattmanGTK kuLinux?
Uma ufuna ukufaka leli thuluzi lokudlula ngokweqile lekhadi levidiyo le-AMD ku-Linux distro yakho, Kumele ulandele imiyalo esabelana ngayo ngezansi.
Into yokuqala esizoyenza ukulanda isifaki, salokhu sizovula i-terminal futhi kuyo sizothayipha umyalo olandelayo:
git clone https://github.com/BoukeHaarsma23/WattmanGTK
Kwenziwe lokhu manje sizokwazi ukufinyelela ifolda elandiwe:
cd WattmanGTK
Ukuba ngaphakathi kwefolda manje Kumele sisebenzise isifaki, senza lokhu ngokuthayipha umyalo olandelayo:
sudo python3 setup.py install
Lapha kuzodingeka silinde kuphela ukuthi ukufakwa kuxazululwe futhi ngeke sibe namaphutha. Ukufaka kuqediwe umyalo we-wattmanGTK uyatholakala kusukela manje ukuze ukwazi ukuwenza ku-terminal yethu.
Ngenye indlela, ithuluzi futhi lingaqalwa kufolda esiyilandile futhi ngokuvula umugqa womyalo obekwe kuyo, singayisebenzisa ngomyalo olandelayo:
python3 run.py
Lapho befuna ukufaka ukucushwa okunikezwe ku-GUI, kufanele nje bachofoze ku-apply futhi nemiyalo izonikezwa yokuthi ungayisebenzisa kanjani i-overuls.
Ipharamitha ye-overdrive eyinhloko kufanele ilungiselelwe.
Ungazi kanjani ukuthi ngabe ukusebenzisa ngokweqile kuyasebenza?
Ukwazi lokhu kufanele nje sizame ukusebenzisa i-WattmanGTK, ngokwenza lokhu ithuluzi elifanayo lizokutshela uma ikhadi lakho likusekela ngokweqile noma cha.
Noma kungenjalo, kungenzeka ukumisa ipharamitha ye-kernel ukuphoqa ukusebenza kwe-overdrive (kungenzeka kungasebenzi kuwo wonke amakhadi).
Okwezinhlelo ezisuselwa ku-GRUB kufanele sihlele umugqa owodwa wokumiswa kwe-grub yethu.
Lokhu singakwenza ngokuvula i-terminal futhi kuyo ake sihlele ifayela le / etc / default / grub bese sithola umugqa:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
Lapho umugqa usutholakele, manje kuzofanela siwuguqule ukuze ube kanjena:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash amdgpu.ppfeaturemask=<the suggested value by WattmanGTK>"
Ekupheleni kwezinguquko kufanele sizigcine kuphela ukuze sikwazi ukuzisebenzisa. Ngemuva kwalokho kufanele sisebenzise umyalo olandelayo:
sudo update-grub
Noma singenza noma imiphi yale miyalo elandelayo:
Kuzinhlelo ze-BIOS:
sudo grub2-mkconfig -o /etc/grub2.cfg
Kuzinhlelo ze-UEFI:
sudo grub2-mkconfig -o /etc/grub2-efi.cfg
Ngeminye imininingwane ngalokhu ungaxhumana isixhumanisi esilandelayo.