Kwinqaku elingaphambili ebesithetha ngalo I-TuxClocker Esi sisixhobo sokugqithisa amakhadi eNvidia kwiLinux kwaye kakuhle kwelinye inqaku ngoku kukujika kwesinye isixhobo samakhadi evidiyo e-AMD.
Isixhobo esiza kuthetha ngaso namhlanje yi-WattmanGTK eyi-interface ye-GTK yokugqithisa amakhadi evidiyo e-AMD.
Malunga neWattmanGTK
Ukusuka kwimisebenzi ekhoyo, kunokwenzeka ukujonga imeko yememori kunye neendlela zokusebenza (P imeko) ye-GPU, kulandelwa utshintsho kwidatha yee-sensors ezihlanganisiweyo kwi-GPU (ubushushu, ubungakanani be-GPU, imemori yevidiyo, isantya sefeni).
I-WattmanGTK ayinakho ukulawula ngokuthe ngqo ukuhamba kunye nevolthiIvelisa kuphela iiparameter zomqhubi we-amdgpu, ekufuneka ugqityiwe xa ulayishwe usebenzisa i ''amdgpu»(Iskripthi esilungeleyo seShell sinokuveliswa kwimveliso yokusebenzisa useto).
Le nkqubo ayixhasi ukutshintsha iiparameter zokusebenza kwendawo epholileyo kwaye ayinakujonga kwangaxeshanye umsebenzi wee-GPU ezininzi.
IWattmanGTK ibhaliwe kwiPython kwaye iyafumaneka phantsi kwelayisensi yeGPLv2.
Kubalulekile ukukhankanya loo nto esi sixhobo sisebenza kuphela ngamakhadi evidiyo asebenzisa umqhubi we-AMDGPU, ke ayiloncedo kumakhadi amadala.
Elinye inqaku elibalulekileyo elinokukhankanywa kukuba i-WattmanGTK inoxanduva lokubonelela umsebenzisi ngemiyalelo kunye neeparameter eziyimfuneko ukuze yena ngokwakhe azisebenzise kulungiselelo lwekhadi lakhe. Ke ezi zenzo zisemngciphekweni womsebenzisi kwaye akukho mdali wesicelo okanye nabani na onoxanduva lokusetyenziswa kwesi sicelo, kuphela ngumsebenzisi wokugqibela.
Uyifaka njani iWattmanGTK kwiLinux?
Ukuba ufuna ukufaka eli khadi levidiyo ye-AMD kwi-Linux distro yakho, Kufuneka ulandele nje imiyalelo esabelana ngayo apha ngezantsi.
Into yokuqala esiza kuyenza kukukhuphela isifaki, ukulungiselela oku siza kuvula i-terminal kwaye siza kuchwetheza lo myalelo ulandelayo:
git clone https://github.com/BoukeHaarsma23/WattmanGTK
Uyenzile le nto ngoku siza kungena kwifolda ekhutshelweyo:
cd WattmanGTK
Ukuba ngaphakathi kwifolda ngoku Kufuneka sisebenzise i-installer, senza oku ngokuchwetheza lo myalelo ulandelayo:
sudo python3 setup.py install
Apha kuyakufuneka silinde kuphela ukuba ufakelo lusombululwe kwaye asizukuba naziphi na iimpazamo. Ukufakwa kugqityiwe Umyalelo we-wattmanGTK uyafumaneka ukusukela ngoku ukubanakho ukuwenza kwisiphelo sethu.
Ngaphandle koko, isixhobo sinokuqalwa kwifolda esiyikhupheleyo kwaye ngokuvula umgca womyalelo obekwe kuyo, singayenza ngalo myalelo ulandelayo:
python3 run.py
Xa befuna ukufaka ubumbeko olunikezwe kwi-GUI, kufuneka nje bacofe ukufaka isicelo kwaye kuya kunikwa imiyalelo ngendlela yokufaka ngaphezulu.
Ipharamitha yokuwela ngaphezulu kufuneka iqulunqwe.
Ukwazi njani ukuba ukuqhuba ngaphezulu kusebenze?
Ukwazi oku Kufuneka sizame ukuqhuba i-WattmanGTK, ngokwenza esi sixhobo sinye siya kukuxelela ukuba ikhadi lakho liyakuxhasa ukuqhuba okungaphezulu okanye hayi.
Nokuba oku akunjalo, Kuyenzeka ukuba uqwalasele iparameter yekernel ukunyanzela ukusebenza ngokugqithileyo (ayinakusebenza kuwo onke amakhadi).
Kwiinkqubo ezisekwe kwiGRUB Kuphela kufuneka sihlele umgca omnye woqwalaselo lwegrub yethu.
Singakwenza oku ngokuvula i-terminal kwaye kuyo masihlele / etc / default / grub fayile kwaye ufumane umgca:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
Nje ukuba umgca ubonwe, ngoku kufuneka siyitshintshe ukuze ibe yile ilandelayo:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash amdgpu.ppfeaturemask=<the suggested value by WattmanGTK>"
Ekupheleni kotshintsho kufuneka sibasindise ukuze bakwazi ukuzisebenzisa. Emva koko kufuneka siphumeze lo myalelo ulandelayo:
sudo update-grub
Okanye sinokwenza nayiphi na le miyalelo ilandelayo:
Kwiinkqubo zeBIOS:
sudo grub2-mkconfig -o /etc/grub2.cfg
Kwiinkqubo ze-UEFI:
sudo grub2-mkconfig -o /etc/grub2-efi.cfg
Ngolwazi oluthe kratya koku ungadibana eli khonkco lilandelayo.